Earth Auger and 4-Stroke Petrol Post Driver

£62699inc. VATIn stock

When could this reach you?

Add your postcode to see the delivery date.

Order updates by email
Secure checkout · sold by NEXTDAYUK LTD

About this product

This T-Mech set combines a petrol earth auger for digging holes with a 4-stroke petrol post driver for driving posts, stakes and pegs into the ground. It suits outdoor construction, fencing and ground preparation work.

The post driver has a 37.7cc single-cylinder, air-cooled XY139-F engine, with 900W (1.2HP) maximum power at 6500r/min and up to 41 ft lbs of impact energy. It starts by hand pull and uses 86 octane unleaded petrol or higher. Three aluminium attachments and one plastic attachment are included.

The earth auger has a 3HP, 9000 RPM engine, a 1.2 litre tank and a rotary speed of 170 to 200 RPM. The three drill sizes are 4, 6 and 8 inches, approximately 10, 15 and 20 cm. Its weight is 8.6 kg including the drill.

A carry case, tool kit and grease are included for transport, setup and maintenance.

Specifications

Post driver fuel tank: 650 ml
Post driver oil tank: 80 ml
Post driver fuel consumption: ≤ 0.9 L/h
Post driver impact frequency: 700 to 1350 rpm
Post driver torque: 1.3 ft/lb at 5500 r/min
Post driver dimensions: 32 cm wide × 30 cm deep × 81 cm high
Post driver weight: 21.9 kg
Earth auger dimensions: 53 cm wide × 26 cm deep × 115 cm high, plus 58 cm when extended
Post driver spark plug: CMR6A
Post driver carburettor: H129-1C4/H629-1C4
Post driver case: black and red plastic
Earth auger fuel: 2-stroke oil mix, 25:1