T-Mech 4 Stroke Petrol Post Driver

About this product

The T-Mech 4 Stroke Petrol Post Driver is made for driving fencing posts, signs, farm posts and similar supports into the ground. Its 37.7cc single-cylinder, air-cooled four-stroke petrol engine has a maximum power output of 900W, or 1.2HP, at 6500R/min.

The dual side handles have dampening springs above and below to help control the tool during use. A hand-pull recoil starter starts the engine, while the 700 to 1350 RPM impact frequency and impact energy of up to 41 ft-lb provide the driving action.

It uses 86 octane unleaded petrol or higher. The 650 ml fuel tank and 80 ml oil tank are separate, so no fuel and oil mixing is required. The supplied attachments cover aluminium posts up to 10 cm and plastic attachments from 20 to 49 mm and 50 to 69 mm.

The black and red post driver is supplied with a portable carry case, two attachments, a tube of grease and a tool kit.

Specifications

• Material: Steel and plastic
• Weight: 23 kg
• Dimensions: 82.5 cm high × 30 cm wide × 29 cm deep
• Carburettor: H129-1C4/H629-1C4
• Fuel consumption: ≤ 0.9 L/h
• Maximum torque: 1.3 ft-lb at 5500 R/min
• Starter system: Hand pull start

Box contents

• 1 x 4 stroke petrol post driver
• 1 x portable carry case
• 2 x attachments
• 1 x tube of grease
• 1 x tool kit